2016
H.P. Jennissen (2016)
A macrophage model of osseointegration
Current Directions In Biomedical Engineering 2016, 2(1), 53-56
S. Lüers, M.Laub, H.P. Jennissen (2016)
Protecting ultra- and hyperhydrophilic implant surfaces in dry state from loss of wettability
Current Directions In Biomedical Engineering 2016, 2(1), 557-560
2014
T. Sänger, A. Sh. Asran, M. Laub, G.H. Michler, H.P. Jennissen (2014)
Release dynamics and biological activity of PDLLA-nanofiber composites of rhBMP-2 and rhVEGF165 as scaffolds for tissue engeneering
Biomed Tech 2014, 59 (Suppl. 1), 9-12
A. Sh. Asran, T. Sänger, M. Laub, G.H. Michler, S. Henning, H.P. Jennissen (2014)
Composition and ultrastructure of PDLLA nanofibers with incorporated rhBMP-2 and rhVEGF165 as scaffolds for tissue engeneering
Biomed Tech 2014, 59 (Suppl. 1), 154-157
I. Bischoff, C. Brochhausen, E. Dohle, T. Sänger, A. Sh. Asran, M. Laub, G.H. Michler, H.P. Jennissen, C.J. Kirkpatrick (2014)
Ultra-structural analysis of angiogenic formation of endothelial cells in co-culture with osteoblasts on BMP-2- and VEGF-PDLLA composites
Biomed Tech 2014, 59 (Suppl. 1), 290-294
H.P. Jennissen (2014)
A general mathematical form and description of contact angles
Mat.-wiss. u. Werkstofftech. 45(11), 961-969
S. Lüers, C. Seitz, M. Laub, H.P. Jennissen (2014)
Contact angle measurements of dental implants
Biomed Tech 2014, 59 (Suppl. 1), 91-94
H.P. Jennissen (2014)
Contact angles in imaginary number space: A novel tool for probing the remaining mysteries of ultrahydrophilicity and superhydrophilicity
Mater. Res. Soc. Symp. Proc., 1648, 1-6
2013
C. Müller-Mai, K. Reiter, C. Knabe, K. Zurlinden, H.P. Jennissen, M. Laub, M. Lindner, H. Fischer (2013)
Stimulation des Knochenwachstums durch ß-TCP-Zylinder unterschiedlicher Porosität: Untersuchungen im Kaninchenfemur mit BMP-2-beschichteten Implantaten
In DKOU 2013 Abstract Volume, ISBN 978-3-00-042937-8, Abstr. Commun. No. GR19-657
K. Zurlinden, M. Laub, D.S. Dohle, M. Lindner, H. Fischer, H.P. Jennissen (2013)
Porous ß-TCP Cylinders as Carrier for Long-term Delivery of Vascular Endothelial Growth Factor (VEGF)
In ESB 2013 Abstract Book, ISBN 978-84-695-7831-5, Abstract T3P037
S. Lüers, C. Seitz, M. Laub, H.P. Jennissen (2013)
On the Utility of Imaginary Contact Angles in the Characterization of Wettability of Rough Medical Hydrophilic Titanium
In Advances in Contact Angle, Wettability and Adhesion, ISBN 978-1-118-47292-7, 155-190
H.P. Jennissen, S. Madenci, S. Lüers, M. Laub (2013)
Monitoring Polyelectrolyte Multilayer Assembly and Stability on Non-Transparent Rough Metal Surfaces
Biomed Tech (Berl.) 2013 Sep 7.
T. Sänger, M. Laub, H.P. Jennissen (2013)
Release of 125I-RhBMP-2 from Foamed Poly-(D,L)-Lactide
Biomed Tech (Berl.) 2013 Sep 7.
S. Lüers, M. Laub, A. Kirsch, H.P. Jennissen (2013)
Large Scale Preparation and Analysis of Hyperthermophilic Dental Implants with µSLA Titanium Surface
Biomed Tech (Berl.) 2013 Sep. 7
2012
H.P. Jennissen, S. Lüers, M. Laub (2012)
Hyperhydrophilic surfaces, the Inverse Lotus Effect and Imaginary Contact Angles
Biomed Tech 57, 915-918
H. P. Jennissen (2012)
Hyperhydrophilic rough surfaces and imaginary contact angles
Mat.-wiss. u. Werkstofftech. 43, 743–750
K. Zurlinden, M. Laub, D.S. Dohle, K.P. Jennissen (2012)
Immobilization and Controlled Release of Vascular (VEGF) and Bone Growth Factors (BMP-2) on Bone Replacement Materials
Biomed Tech 57, 989-992
K. Zurlinden, M. Laub, D.S. Dohle, E. Spassova, R. Ewers, H.P. Jennissen (2012)
Suitability of AlgOss 100 for the combined release of BMP-2 and VEGF
J Tissue Eng Regen Med 6 (Suppl. 1), 6
K. Zurlinden, M. Laub, M. Lindner, H. Fischer, C. Müller-Mai, H. P. Jennissen (2012)
Stimulation des Knochenwachstums durch BMP-2-Beschichtung von Bioglasimplantaten: BMP-2 Beschichtungstechnologie
In DKOU 2012 Abstract Volume, ISBN 978-3-00-039014-2, Abstr. Commun. No. GR11-826
K. Zurlinden, M. Laub, D.S. Dohle, M. Lindner, H. Fischer, H.P. Jennissen (2012)
Biofunctionalization of ß-TCP Cylinders with Vascular Endothelial Growth Factor (VEGF)
Bionanomaterials 13 (1-4), 168
2011
H.P. Jennissen (2011)
Redefining the Wilhelmy and Young equations to imaginary number space and implications for the wettability measurements
Materialwissenschaft und Werkstofftechnik 42(12) 1111-1117
L.J. Lehmann, A. Werner, D.J. Dinter, E. Mauermann, R. Seidling, J. Brade, M. Laub, S. Lüers, S. Madenci, H.P. Jennissen, U. Obertacke, H.P. Scharf, M.L. Schwarz (2011)
Scintigraphic evaluation of rhBMP-2-biocoated implants reveals no ectopic bone formation
Biomed. Pharmacother. 65(1) 63-68
K. Schickle, K. Zurlinden, C. Bergmann, M. Lindner, A. Kirsten, M. Laub, R. Telle, H.P. Jennissen, H. Fischer (2011)
Synthesis of novel tricalcium phosphate-bioactive glass composite and functionalization with rhBMP-2
J. Mater. Sci. Mat. Med. 22, 763-71
K. Zurlinden, D.-S. Dohle, M. Laub, H.P. Jennissen (2011)
Immobilization and controlled release of vascular growth factor (VEGF) on a synthetic bone replacement material
BIOmaterialien 12 (1-4), 62
H. P. Jennissen (2011)
Redefining the Wilhelmy and Young equations to imaginary number space and implications for wettability measurements
Mat.-wiss. u. Werkstofftech. 42, 1111–1117
2010
Jennissen, H.P. and Lüers, S. (2010)
Lotus-Effect and inverse Lotus-Effect in connection with extremely rough titanium surfaces
Materialwiss. Werkstofftech. 41, 1062-1069
D.-S. Dohle, S.D. Pasa, M. Laub, J.H. Wissler, H. Jakob, H.P. Jennissen (2010)
How to monitor Angiogenesis?
BIOmaterialien supplement S1, 25
D.-S. Dohle, S.D. Pasa, H. P. Jennissen (2010)
Fibrinogen Adsorption Hysteresis on Ultra-Hydrophilic Titanium Surfaces
BIOmaterialien supplement S1, 26
M. Lange, T. Sänger, M. Laub, B. von Rechenberg, A. Wolk, R. Ewers, J. Langhoff, B. Froesch,
T. Knecht, J. Mayer, H.P. Jennissen (2010)
Polylactide-Algisorb® BMP-2-carrier for sustained BMP-2 release from PDLLA cages
BIOmaterialien supplement S1, 57
S. Lüers, M. Laub, A. Kirsch and H.P. Jennissen (2010)
A novel method for protection of ultra-hydrophilic surfaces from loss of wettability
BIOmaterialien supplement S1, 60
S. Madenci, M. Laub, H. P. Jennissen (2010)
Biological Activity of rhBMP-2 immobilized on Titanium Plasma Sprayed Surfaces
BIOmaterialien supplement S1, 61
S. Madenci, M. Laub, H. P. Jennissen (2010)
Dependence of rhBMP-2 binding on the number of layer pairs in polyelectrolyte multilayers
BIOmaterialien supplement S1, 62
M. Meißner, S. Madenci, H. P. Jennissen (2010)
Real-time kinetics of the binding of rhBMP-2 to polyelectrolyte multilayers on quartz glass
BIOmaterialien supplement S1, 63
S.D. Pasa, D.-S. Dohle, M. Laub, J.H. Wissler, H.P. Jennissen (2010)
Chicken Chorioallantoic Membrane, In vivo Model, Not Only for Angiogenesis
BIOmaterialien supplement S1, 69
J. Piontek, R. Zdrenka, H. P. Jennissen (2010)
Dependence of rhBMP-2 binding on the surface concentration of aminopropyl groups on glass
BIOmaterialien supplement S1, 71
K. Zurlinden, M. Laub, D. Moser, E. Spassova, R. Ewers, H.P. Jennissen (2010)
In vivo comparison of osteoinduction by glycosylated and non-glycosylated rhBMP-2
BIOmaterialien supplement S1, 102
M. Lange, S. Madenci, J. Piontek, M. Laub, S. Grohmann, K. Liefeith, H. Füredi-Milhofer, H.P. Jennissen (2010)
Polyelectrolyte multilayers on glass as a model system for the immobilization of rhBMP-2
BIOmaterialien supplement S1, 103
K. Zurlinden, M. Laub, E. Spassova, D. Moser, C. Schopper, G. Russmüller, R. Ewers, H.P. Jennissen (2010)
Suitability of bone replacement materials as BMP-2 delivery devices
Biomed Tech 55 (Suppl. 1), 28-30
Chatzinikolaidou M, Lichtinger TK, Müller RT, Jennissen HP. (2010)
Peri-implant reactivity and osteoinductive potential of immobilized rhBMP-2 on titanium carriers
Acta Biomater. 6: 4405-21
K. Zurlinden, M. Laub, M. Lindner, K. Koczur, A. Kirsten, A. Oliviera, G. Seifert, S. Gemming, C. Müler-Mai, H. Fischer, H.P. Jennissen (2010)
Synthesis of osteoinductive glasses by immobilization of rhBMP-2
In TERMIS-EU 2010 Abstract Volume, ISBN 978-0-9564492-0-7, Abstr. Commun. No. 468
2009
Dohle DS, Pasa SD, Gustmann S, Laub M, Wissler JH, Jennissen HP, Dünker N. (2009)
Chick ex ovo culture and ex ovo CAM assay: how it really works
J Vis Exp. 33, pii: 1620
Lattner, D., Jennissen, H. P. (2009)
Preparation and properties of ultra-hydrophilic surfaces on titanium and steel
Materialwissenschaft und Werkstofftechnik 40(1-2), 108-116
Volkenstein, S., Brors, D., Hansen, S., Minovi, A., Laub,M., Jennissen, H.P., Dazert, S., Neumann, A. (2008)
Influence of bone morphogenetic protein-2 on spiral ganglion neurite growth in vitro
Eur Arch Otorhinolaryngol 266(9), 1381-89.
K. Zurlinden, M. Laub, E. Spassova, D. Moser, R. Ewers, H.P. Jennissen (2009)
Coating of NuOss with rhBMP-2: An osteoinductive bone replacement material
BIOmaterialien 10 (3/4), 159
2008
Zhang S, Wang G, Lin X, Chatzinikolaidou M, Jennissen HP, Laub M, Uluda? H. (2008)
Polyethylenimine-coated albumin nanoparticles for BMP-2 delivery
Biotechnol Prog. 24(4): 945-56.
K. Zurlinden, M. Laub, E. Spassova, D. Moser, R. Ewers, H.P. Jennissen (2008)
rhBMP-2 loaded microstructured phycogenic bone substitutes
BIOmaterialien 9 (3/4), 102
T. Sänger, M. Lange, M. Laub, H.P. Jennissen (2008)
Foamed rhBMP-2/Poly-(D,L)-lactide as drug delivery system for bone tissue engineering
BIOmaterialien 9 (3/4), 104
M. Laub, S. Madenci, H.P. Jennissen (2008)
biological activity of rhBMP-2 immobilized titanium plasma sprayed surfaces (TPS)
BIOmaterialien 9 (3/4), 201
2007
Jennissen, H.P., Laub, M. (2007)
Development of an universal affinity fusion tag
Materialwiss. Werkstofftech. 38, 1035-1039
Laub, M., Chatzinikolaidou, M., Jennissen, H.P. (2007)
Aspects of BMP-2 binding to receptors and collagen: Influence of cell senescence on receptor binding and absence of high-affinity stoichiometric binding to collagen
Materialwiss. Werkstofftech. 38, 1019-1026
2006
S. Lüers, T. Sänger, U. Gerth, H.P. Jennissen (2006)
Preparation and characterization of ultra-hydrophilic, nanostructured surfaces on transition metals with chromosulfuric acid
Journal of Biomechanics, 39 (Suppl. 1), 7225
K. Zurlinden, H.P. Jennissen (2006)
Immobilization and release kinetics of rhBMP-2 from bone replacement materials
Journal of Biomechanics, Vol. 39 Suppl. 1, page S590
Becker, J., Kirsch, A., Schwarz, F., Chatzinikolaidou, M. (2006)
Bone apposition to titanium implants biocoated with recombinant human bone morphogenetic protein-2
Clin Oral Invest 10, 217-224
K. Zurlinden, M. Laub, H.P. Jennissen (2006)
Immobilization of rhBMP-2 on bone replacement materials and controlled release
BIOmaterialien 7 (3), 251
M. Chatzinikilaidou, M. Laub, H.P. Jennissen (2006)
Biological activity of immobilized Bone Morphogenetic Protein 2 (BMP-2) on inplants
BIOmaterialien 7 (3), 134
H. Eufinger, C. Rasche, J. Park, W. Wehmöller, I. Schmitz, A. Tannapfel, M. Chatzinikolaidou, T. Annen, H.P. Jennissen (2006)
Interdisciplinary design of geometrically structured resorbable implants for cranioplasty – long-term in-vivo results in sheep
BIOmaterialien 7 (3), 145
M. Laub, H.P. Jennissen (2006)
Effect of cell passage number on BMP-2 response in MC3T3-E1 cells
BIOmaterialien 7 (3), 181
S. Lüers, M. Chatzinikolaidou, M. Laub, J. Becker, H.P. Jennissen (2006)
Generation of nano-structured surfaces on titanium with ultrahydrophilic and osteophilic properties by chromosulfuric acid treatment
BIOmaterialien 7 (3), 188
A. Neumann, M. Chatzinikolaidou, M. Laub, C. Unkel, S. Dazert, H.P. Jennissen, K. Jahnke (2006)
Induction of bone formation by titanium implants coated with immobilized rhBMP-2 in the rabbits petrous bone
BIOmaterialien 7 (3), 194
2005
Zurlinden, K., Laub, M., Jennissen, H. P. (2007)
Chemical functionalization of a hydroxyapatite based bone replacement material for the immobilization of proteins.
Materialwissenschaft und Werkstofftechnik 36(12), 820-827
K. Zurlinden, H.P. Jennissen (2005)
Immobilization of a model protein in modified porous hydroxyapatite ceramics
International Journal of Artificial Organs 28, 424
M. Laub, H.P. Jennissen (2005)
Low binding capacity of collagen I and IV for BMP-2 render them unfavourable as carrier in BMP-2 augmented bone healing
International Journal of Artificial Organs 28, 393
H.P. Jennissen, M. Chatzinikolaidou, M. Laub (2005)
Transforming inert implants to bioactive scaffolds for bone regeneration by engineered BMP-2 releasing surfaces
International Journal of Artificial Organs 28, 307
M. Chatzinikolaidou, H.P. Jennissen (2005)
Release kinetics of rhBMP-2 adsorbed to aminopropylsilane modified titanium implant surfaces
International Journal of Artificial Organs 28, 365
H.P. Jennissen (2005)
Ultra-hydrophilic transition metals as histophilic biomaterials
Macromol. Symp., 225, 43-69